1201 Series UHF Wireless Microphone Systems


1201 Wireless Microphone

Features

  • Specify Panasonic or Sony type slot-in
  • 1201BT with EX-503H lavalier mic
  • 188 DTV frequencies / 4 UHF TV bands
  • True diversity system
  • Improved image rejection, S/N ratio & superior diversity isolation
  • Multi-function LCD shows channel, frequency, battery info, AF level, and diversity operation

Discontinued Product
Affected SKUs: 1201URX/Si, 1201URX/Si-S, 1201URX/AB, 1201URX/VM, 1201BT, 1201XT, ECM-44H, 1201SiT, 1201SiS, 1201SiX, 1201ABT, 1201ABS, 1201ABX, 1201VMT, 1201VMS, 1201VMX



  • Whether you use a Panasonic® or Ikegami® camera with “slot-in” receiver capabilities, or use the Anton-Bauer® Gold Mount®, or a V-Mount battery, there’s an Azden 1201 designed specifically for your use. The all new receivers and transmitters include:
    • New compander circuit for more natural sound
    • New DTV-compatible (188) frequencies covering 4 UHF TV bands
    • True diversity system with 2 complete front-ends and high-gain antennas
    • Dielectric filters throughout, for improved image rejection and superior diversity isolation
    • High 5th-order filters for improved S/N ratio
    • Multi-function LCD shows channel, frequency, battery info, AF level, and diversity operation
    The slot-in design of the receivers and flexible feature set make the Azden 1201 Series a viable choice for broadcast, ENG, EFP, video & film shoots, etc.
     

    The 1201 wireless systems are no longer available as a result of the FCC’s 2017 frequency auction and reallocation. The 1201 wireless systems and components will remain legal to operate in the U.S. until July 13, 2020. Cease of operation may be required sooner if interference to new wireless licensees occurs. More information about this frequency auction can be found here: https://www.fcc.gov/general/wireless-microphones-0

  • 1201URX/Si
    • RF Carrier Frequency Range: 188 steps ~ 638.125 – 661.875 MHz
    • Micro Computer Controlled PLL Synth.
    • Noise Reduction: Expander (THAT)
    • Effective Operating Range: 200 – 300 ft ~ 60 – 100m
    • Frequency Response: 50 – 15kHz (± 1.5dB)
    • RF Sensitivity: (12dB SINAD) 1.2μV
    • Adjacent Channel Selectivity: > 70dB (± 250kHz)
    • Image Rejection: > 93dB
    • IF Rejection: > 93dB
    • Audio THD: 62dB (± 5kHz Deviation) “A” Weighted
    • Power Requirements: 10 – 17V DC @ 200mA for 1201URXSi
    • Dimensions: 68W x 84H x 18D mm – 1200URX/Si insertion
    • Operating Temperature Range: -50 – +122 F ~ -10 – +50 C
    • Weight: 8.8 ounces ~ 250g for 1201URX/Si
    1201URX/VM
    • RF Carrier Frequency Range: 188 steps ~ 638.125 – 661.875 MHz
    • Micro Computer Controlled PLL Synth.
    • Noise Reduction: Expander (THAT)
    • Effective Operating Range: 200 – 300 ft ~ 60 – 100m
    • Frequency Response: 50 – 15kHz (± 1.5dB)
    • RF Sensitivity: (12dB SINAD) 1.2μV
    • Adjacent Channel Selectivity: > 70dB (± 250kHz)
    • Image Rejection: > 93dB
    • IF Rejection: > 93dB
    • Audio THD: 62dB (± 5kHz Deviation) “A” Weighted
    • Power Requirements: 11 – 15V DC @ 220mA
    • Dimensions: 82W x 150H x 60D mm – 1201URX/VM
    • Operating Temperature Range: -50 – +122 F ~ -10 – +50 C
    • Weight: 26.45ounces ~ 750g for 1201URX/VM
    1201URX/AB
    • RF Carrier Frequency Range: 188 steps ~ 638.125 – 661.875 MHz
    • Micro Computer Controlled PLL Synth.
    • Noise Reduction: Expander (THAT)
    • Effective Operating Range: 200 – 300 ft ~ 60 – 100m
    • Frequency Response: 50 – 15kHz (± 1.5dB)
    • RF Sensitivity: (12dB SINAD) 1.2μV
    • Adjacent Channel Selectivity: > 70dB (± 250kHz)
    • Image Rejection: > 93dB
    • IF Rejection: > 93dB
    • Audio THD: 62dB (± 5kHz Deviation) “A” Weighted
    • Power Requirements: 11 – 15V DC @ 220mA (10 – 17V DC @ 200mA for 1201URXSi)
    • Dimensions: 93W x 119H x 49D mm – 1201URX/AB
    • Operating Temperature Range: -50 – +122 F ~ -10 – +50 C
    • Weight: 15.87ounces ~ 450g for 1201URX/AB
    1201BT
    • Output Power: 30mW
    • Max Modulation Sensitivity: -4dBm
    • MIC Level / Imped.: -56dBm / 2.2kΩ (± 5kHz Deviation)
    • Power Requirements: 3V DC (2 “AA” Alkaline) @ less than 150mA
    • Dimensions: 2.48 (W) x 3.86 (H) x 1.12 (D) inches
    • 63 (W) x 98 (H) x 28.5 (D) mm
    • Weight: w/Battery 6.35 ounces ~ 180g
    1201XT
    • Output Power: 30mW
    • Max Modulation Sensitivity: +20dBM ~ 0dBm
    • MIC Level / Imped. (Dynamic): -60dBm / 2.2kΩ (± 5kHz Dev.)
    • Phantom Power: 48V ±2V @ 2mA
    • Power Requirements: 3V DC (2 “AA” Alkaline) @ < 180mA – 290 mA w/Phantom Power ON
    • Dimensions: 1.57 (W) x 4.49 (H) x 1.57 (D) inches
    • 40 (W) x 114 (H) x 40 (D) mm
    • Weight w/Battery: 6.35 ounces ~ 180g